If you sleep hot, or you share a bed with someone who is always cold, a smart mattress cover is one of the most effective upgrades you can make. Instead of replacing your whole mattress, you add a thin layer on top that heats or cools the bed surface, often with a separate setting for each side. Some also track your sleep while you lie on them.
This guide explains how smart mattress covers work, compares the main options in 2026, and covers the details that decide whether one will actually suit your bed, your bedroom and your budget. If you want the bigger picture first, our smart mattress guide also covers full smart beds and sensor pads.
Table of Contents
- What Is a Smart Mattress Cover?
- How Smart Mattress Covers Work
- Quick Picks
- Smart Mattress Cover Comparison
- Best Smart Mattress Covers and Alternatives
- Buying Checklist
- Setup and Care Tips
- FAQ
- Final Verdict
What Is a Smart Mattress Cover?
A smart mattress cover is a powered layer that fits over your mattress, a bit like a thick fitted sheet. Thin channels inside it carry water that a bedside hub heats or cools, and an app lets you set the temperature, build a schedule or let the system adjust automatically through the night. Many covers also have sensors that track sleep stages, heart rate and breathing.
It is worth separating three things that often get lumped together:
- Smart covers wrap the mattress and connect to a hub, like the Eight Sleep Pod 6.
- Smart toppers sit on top of the mattress under your sheet, like the Chilipad 2.0. They work the same way but are a separate pad rather than a fitted cover.
- Cooling covers without power, such as Helix’s GlacioTex cover, use cool-to-the-touch fabric. They feel cooler when you lie down but do not actively change temperature or connect to an app.
Why does surface temperature matter so much? The Sleep Foundation recommends a bedroom temperature of roughly 65 to 68°F, because your core temperature needs to drop for deep sleep. A smart cover cools the spot that matters most, right where your body touches the bed, which is often more effective and cheaper than running the AC hard all night.
How Smart Mattress Covers Work
Most active systems follow one of two designs.
Water-based systems pump water through thin tubes in the cover or topper. The hub contains a small heat pump that warms or chills the water, then sends it back through the bed. Water carries heat far better than air, so these systems can make a big difference to how warm or cool the bed feels. The trade-off is maintenance: you refill the water now and then and add a cleaning solution to keep the lines fresh.
Air-based systems like the BedJet 3 use a fan unit at the foot or side of the bed to blow cooled or warmed air under your sheets. There is no water to manage and they cool you down quickly, but they make more noise than a water hub, and the airflow feels different from a cool surface.

On top of the hardware sits the software. Good apps let you set separate bedtime, mid-night and wake-up temperatures, because most people sleep best a little cooler in the first half of the night and like some warmth near the alarm. The most advanced covers adjust automatically based on what their sensors detect, such as your heart rate or whether you are snoring.
Quick Picks
- Best smart mattress cover overall: Eight Sleep Pod 6. Dual-zone heating and cooling, a smaller hub and detailed sleep tracking.
- Best without a subscription: Chilipad 2.0. A water topper with a wide 55–115°F range and no membership.
- Best air-based option: BedJet 3. Fast cooling with no water to manage.
- Best budget cooling: A passive cooling cover, such as Helix GlacioTex, when you are buying a new mattress anyway.
- Best for sleep data only: Withings Sleep Analyzer, an under-mattress pad for about $130.
Smart Mattress Cover Comparison
| Option | Type | Queen price (approx.) | Range / function | Subscription |
|---|---|---|---|---|
| Eight Sleep Pod 6 | Water cover + hub | $2,699 (Solo from $1,999) | About 55–109°F, dual-zone | Required, from $199/yr |
| Chilipad 2.0 | Water topper + dock | $2,998 dual-zone | 55–115°F | None |
| BedJet 3 | Air system | About $1,549 | Cooling and warming air | None |
| Helix GlacioTex cover | Passive cooling cover | About $374 add-on | Cool-touch fabric | None |
| Withings Sleep Analyzer | Sensor pad | $129.95 | Sleep tracking only | Optional |
Prices are approximate US list prices and change often, especially around sales. To see how a membership changes the long-term price, try our free Smart Mattress Cost Calculator.
Best Smart Mattress Covers and Alternatives
Eight Sleep Pod 6: best smart mattress cover overall
Specs: Fitted water cover + hub | About 55–109°F per side | 18 sensors | Queen about $2,699, King about $2,999, Solo from $1,999 | Autopilot required, $199–$399/yr
Eight Sleep released the Pod 6 in September 2026 as a full replacement for the Pod 5. The cover fits over your existing mattress and is held in place with a strap system, while a tube runs to the hub. That hub is now about half the size of the old one and is designed to slide under most bed frames, which solves one of the biggest complaints about earlier Pods.

Each side heats or cools on its own, and Eight Sleep says the Pod 6 reaches its target about 20% faster than before. With nine sensors per side, it can keep two sleepers’ temperatures separate even when you lie close together, and it can ignore a pet or child who climbs in. Tracking covers sleep stages, heart rate, HRV and breathing, and you can wake to a vibration or gentle warming instead of a sound alarm.
The Autopilot membership is required. One plan covers both sleepers, and the tier sets your warranty: Standard ($199/yr) comes with two years, while Enhanced ($299/yr) and Elite ($399/yr) extend it to five. If you only need one side, the Solo version starts at $1,999, and two Solo covers can be zipped together later.
- Pros: True dual-zone heating and cooling; compact hub; detailed tracking; Solo option; works with the mattress you own.
- Cons: Membership required; warranty tied to your plan; premium price.
Chilipad 2.0: best without a subscription
Specs: Water topper + dock | 55–115°F | Single or dual zone | Twin XL from $1,599, queen dual-zone about $2,998 | No subscription | 2-year warranty
Strictly speaking, the Chilipad 2.0 is a topper, but it does the same job as a smart cover and is the main alternative to Eight Sleep. Sleepme says it cools to 55°F and heats to 115°F. The app runs weekly schedules, including warming near your alarm time, and schedules keep running even if your Wi-Fi drops. A haptic bedside remote with a dial makes quick changes easy, and optional in-bed detection starts your schedule when you lie down.
Compared with the older Chilipad 1.0 (Dock Pro), version 2.0 adds a washable top cover, a built-in waterproof protector, a quieter dock and a two-year warranty. Upkeep is simple but real: you fill it with distilled water and add cleaning solution about once a month.
- Pros: No membership; widest temperature range here; physical remote; works offline on a schedule.
- Cons: Less biometric tracking than Eight Sleep; regular water care; dock makes a low hum.
BedJet 3: best air-based option
Specs: Air system | Cooling and warming | Dual-zone setups available | Queen about $1,549 list | No subscription
The BedJet is not a cover at all. It is a compact fan unit that blows air through a hose under your sheets. According to Tom’s Guide, the queen model lists at about $1,549 and often drops in big sales. It is good at quickly clearing trapped heat and moisture, and there is no water to maintain.
- Pros: Cheaper than water systems; very fast to cool; no water upkeep; no membership.
- Cons: Fan noise; you feel moving air rather than a cool surface; no sleep tracking.
Passive cooling covers: best budget option
If you are buying a new mattress anyway, a built-in cooling cover is the cheapest way to sleep a little cooler. On the Helix Midnight, for example, the GlacioTex cooling cover with pillow top is an add-on of about $374 at list price, and it comes standard on Helix Elite models. It will not change temperature on its own or connect to your phone, but it is silent and needs no power.
Withings Sleep Analyzer: best for sleep data only
Some people searching for a smart mattress cover really just want sleep tracking. For them, an under-mattress pad like the Withings Sleep Analyzer (about $129.95) is far cheaper. It tracks breathing, movement and heart rate from under the mattress and can trigger smart home routines, for example dimming the lights when you get into bed.
Buying Checklist

- Mattress depth: Make sure the cover fits your mattress height, including any topper you already use. Very deep pillow-tops can be a tight fit.
- Hub space and power: You need floor space beside or under the bed and a nearby wall outlet. Measure the clearance under your bed frame if you want the hub hidden.
- Subscription: Check what still works without the membership and how much it costs over the years you plan to keep it.
- Water care: Water systems need occasional refills and cleaning. If you know you will not keep up with that, an air system may suit you better.
- Noise: All active systems make some sound. Light sleepers should read reviews about hub or fan noise.
- Trial and warranty: Read both. With Eight Sleep, warranty length depends on your plan. Chilipad 2.0 offers a 30-day trial and a two-year warranty, with a three-year upgrade available.
Not sure your current mattress is worth keeping? Take our 60-second Mattress Finder Quiz first. A cooling cover cannot fix a mattress that is too soft or sagging.
Setup and Care Tips
- Plug it straight into the wall. Do not run a heating or cooling hub through an extension cord or a smart plug, unless the manufacturer says it is fine.
- Route tubes carefully. Keep hoses free of kinks and out of walkways, especially if you get up at night.
- Use a thin sheet. Heavy mattress protectors or thick sheets slow down heat transfer. A breathable cotton or percale sheet works best.
- Start with a schedule. Try slightly cool at bedtime, cooler in the early hours and warmer near your alarm, then adjust after a week.
- Pair it with the room. Let your smart thermostat handle the room and the cover handle the bed. A quiet smart ceiling fan helps on hot nights.
- Automate bedtime. Add the cover to an Alexa routine or a Google Home or HomeKit scene, if your system supports it, so lights dim and the bed cools at the same time.
Recovery matters as much as training; our smart home gym guide shows how to build a connected workout space.
FAQ
Does a smart mattress cover work on any mattress?
Most work on standard foam, hybrid and innerspring mattresses within a certain thickness range. Check the size and depth limits on the product page before you buy, especially if you have a very deep pillow-top.
Can you feel the water tubes?
The tubes are thin and sit under a soft layer, so most people do not notice them through a sheet. Very light sleepers on firm mattresses are the most likely to feel them.
Do smart mattress covers use a lot of electricity?
They use power all night, but they only heat or cool a small area. Many owners can set the room thermostat a little higher in summer because the bed handles the cooling, which can balance out the cost.
Is the Eight Sleep membership required?
For the Pod 6, yes. Autopilot plans start at $199 a year, one plan covers both sleepers, and the plan you choose also sets your warranty length.
Is a smart cover better than a smart bed?
If you like your current mattress, a cover is usually the better value because you keep the comfort you have and add temperature control. If you also want adjustable firmness on each side, a full smart bed like a Sleep Number makes more sense.
How often do you clean a water-based cover?
Follow the maker’s guidance. With the Chilipad 2.0, for example, you use distilled water and add cleaning solution about once a month, and the top cover is machine-washable.
Final Verdict
For most hot sleepers and couples who disagree on temperature, the Eight Sleep Pod 6 is the most complete smart mattress cover in 2026. It has true dual-zone control, a much smaller hub and the best tracking here, as long as you accept the required membership. If you would rather pay once and be done, the Chilipad 2.0 gives you a wider temperature range with no subscription, and the BedJet 3 is a cheaper, water-free alternative if a little fan noise does not bother you.
And if you only want a slightly cooler feel or some sleep data, skip the expensive hardware. A passive cooling cover or a $130 sensor pad may be all you need. Whatever you pick, start with a mattress that suits how you sleep, then let the cover handle the temperature.







